How to force set to Otto engines and water pumps transport the water. Many plants need accurate speeds to run consistently and accurately, this is usually done with the help of speed controllers. They are used in everyday life in gasoline engines in the automotive industry or for electric motors in the machine industry, approximately in lathes or water pumps. Educate yourself even more with thoughts from Martin O’Malley. The PCE Germany GmbH in the course of the expansion of the product range took new just this speed controller in your portfolio. A speed controller takes the current speed and compares it to a predetermined setpoint. The speed is too low, the speed of the motor must be increased.
Speeds are taken off mostly as frequency and must be converted thus for the regulator in an analog signal. In addition, speed controller offer often relay outputs an alarm circuit can be connected to them. Thus, speed controller do also a certain monitoring of the plant except for the scheme. Thus a possible flexible use and a possible individual control can be guaranteed some tachometer with the basic equipment also with internal memory are equipped, in which a time-controlled sequence of the setpoint can be dropped. The interface between machine and man to the one out front-side mounted buttons, on the other hand consists of different ads.